Golf Bag with Cart Card

This is my golf bag with cart card. I saw a card with a similar golf bag done by Stacey Carter and I changed it around a little bit. CLICK HERE to see her card. I thought it needed a golf cart too!

I wrote out the basic directions and I added a few pictures to show some things that might be hard to tell by looking at the photo!



To make the handle of the cart I punched with the slot punch to make the hole in black cardstock and then put it inside my word window punch.


To make the bag I used a piece of going gray in 1 3/8" x 3". I put the end half way into the small oval punch like below and punched. This makes the top of the bag


I put the other side inside the punch to get the rounded shape at the bottom. If you put a piece of scrap cardstock inside the punch the right way it is much easier to get your golf bag piece in.


This is what your bag should look like. You also need a black and basic gray small oval. To get the black sliver, see next photo. Don't forget to sponge the sides of your bag with going gray to give it some dimension!


Once you punch your black oval, put the piece of cardstock back into the punch and just take off a little sliver of the top like shown in the punch.


The black full oval goes in back and next your basic gray oval. Then put on your golf clubs and put the bag over that. Last glue the little black sliver at the edge of the top of the bag to make it look like your golf clubs are actually in the bag. You can sponge to add more dimension on the bottom of the basic gray oval.
The handle is just the word window taped to the black grosgrain and taped onto the back of the bag.

Scallop Envelope Woven Basket & Card

Scallop Envelope Woven Basket & Card Project

This project is great for a Baby Shower, new baby or for a new neighbor house warming gift! Change up the colors and make it for any holiday! The box is 3 1/8" square by 2 1/4" in height.
To get directions for this project CLICK HERE!

Christmas Bow - Ornament

I was looking through the projects on Splitcoast and found this tutorial (CLICK HERE) to make a bow. I changed mine around a little. I used 8- 4" x 1/2" pieces of paper and 4- 3 1/4" x 1/2" pieces of paper instead of what they said. I used a large sized brad to hold the pieces together and left off the top loop of the bow. Pretty nice for wrapping a present or even for an ornament on the tree!

These are the three pieces I used.


I stacked them together with large glue dots alternating the patterns.

Heart Pretties Ornament

While I had the pretties kit out and ornaments on the brain I thought I would play around. I came up with this heart ornament. The paper is 1/2" wide by 4" long of double sided patterned paper, you need four of them. You just put all 4 pieces on the hat pin and starting with the first that you put on you just twist it twice around and put the other end on. I put a few beads in the center to keep them apart and I got a heart! Nice simple little ornament.

Snowflake Pretties Ornament

This ornament was made using the Pretties Kit and the Snowflakes Set #2 sizzlets die cut (The small set of four). You could also do the same thing with the snowflake punch! The ribbon is the white organza ribbon. I used the two way glue pen to get it together and to get the ends together I used a toothpick with the Tombow green capped glue. It was a little tedious but well worth it! It's hard to see in the picture but this is really beautiful and delicate looking.

Here is one snowflake attached to the other. You want to attach half of each to the other and keep going around.


This is three attached together.


Here are all five snowflakes on the hat pin with some beads from the Pretties Kit.


And here it is!

Serene Top Note Card

This card is using the Serene Snowflakes stamp set, the Embossing plates and the Top Note die with some creative folding.

To get the right shape for the card you need a 5 1/2" x 8 1/2" paper folded in half to make your card. Fold it in half again like shown below. (Sorry its a little blurry)

Put it in the top note die with the fold on the inside. Put it through the big shot and you will get this.

Opened up this is what you have.

Now spray it with alcohol and put it through with one of the embossing plates folded in half to the normal card shape. This will remove the crease and add the embossed design. This is will be your main card shape.

For the blue in the center I used a 3 5/8" square and folded it in half. I put it in the bottom half of the top note die with the fold to the top.

Once its out I sprayed it with alcohol and put it through again with nothing just to flatten out the crease. (This is before it was flattened)

I used the white taffeta ribbon and dyed it using the brocade blue marker. I stamped two of the large snowflakes using brocade blue and highlighted them with my night of navy marker. I cut part of one out and popped it up with a dimensional in the center of the other with a clear rhinestone brad in the center. I used night of navy paper to highlight the outside of the snowflake.

Hope you like it! I love this set and this die!

"Scoring"

My husband and I were cleaning this morning after I had finished cutting paper for my card class tonight. I remembered that I had not scored pieces for one of the projects so I sat down to do it. He came in and asked for help for a minute and asked what I was doing because earlier I had told him that I had everything cut out. I told him that I was "scoring". He gave me a strange look and walked away muttering that "scoring" had a totally different meaning for him.
Just goes to show the difference between men and women. If I told my husband that I had a lot of "scoring" to do this afternoon he would be pretty psyched! Boy would he be surprised when I told him I had finished without him!

Pratt Door Ribbon Wreath

I did a search on splitcoast after I posted my other wreath and found one of a door with a wreath. I knew I had to put my own spin on it. Here is the one that I found.

And here is mine!

I had to make a little Pratt sign on my door. This is a standard card size so you just open the door to see the inside! CLICK HERE to see how to do this.
Ok... I have had enough stamping for one day. I am going to bed. Goodnight.

Build-a-roo Christmas

I decided to put down the punches and actually play with my stamps again! I love this kangaroo set. This is Build-a-roo and the sentiment is The Best Yet, which I think is retired. Of course the Christmas Cocoa DSP. For the shirt I just stamped on the DSP and cut it out and the hat I drew and colored in.

Ornament Punch Angel

I don't usually copy things exactly but in this case it came pretty close! I think the only different thing I did was used Serene Snowflakes as my stamp. Click Here to see Sandi Maciver's original angel and how to make it. She is so cute, I'm not sure what I'm going to do with her yet.

Night of Navy Snowflakes

Ok... so I saw a card on Connie Diebler's site that she did off of a card on Kimberly Van Diepen's site and I just had to put my own spin on it! I did not have almost any of the stamps or accessories that they did so this is what I came up with! (Click on their names to view their cards.)
I used Night of Navy, Kraft and Whisper White cardstock and used the Snowflakes set #2 die cut Sizzlets as my negative stencil. The snowflakes are stamped with Serene Snowflakes and the saying is from the Holiday Best hostess set both in Night of Navy ink. Hope you like it! If you do your own spin on it, link everybody up! Such a great technique!

Ribbon Diagonal Weave for Baby!

So since I had my ribbon out I thougth I would try someting else this morning. I have to admit, getting the weave done on this card did take a long time, but I think it was worth it in the end. So cute for a new baby!
My square is 3 1/2" and I just put snail all the way around the perimeter on the back. I wrapped the ribbon around in one direction and then just weaved the other way through on the diagonal. I attached it to the scallop square with sticky strip. Then just used a sponge with Pretty in Pink for the border. They saying is from Warm Words.

Ribbon Weave Wreath

I am so excited about this card! I love it! I just found a video showing how to do this great technique. When I was a kid I made bracelets this way all the time and someone thought to make it into a wreath! I used Always Artichoke 1/4" grosgrain ribbon for the wreath and Real Red for the bow. The wreath ends up being 3" across. I did use the 6 feet like it said in the video and it came out perfectly. The red dots are red brads just pushed through the ribbon, I thought this would look great with the red rhinestone brads but I don't have any. The white is using the Scallop Circle #2 die cut and the large card is cut using the Scallop Square die cut. The sentiment is in Basic Black using the Holiday Best hostess set. And of course Serene snowflakes, the small one with three snowflakes, in Whisper White craft for the background. I glued the wreath on using the large glue dots and popped up the white scallop with dimensionals.
I thought this would make the cutest ornaments too!
CLICK HERE to see photo step by step directions of the weave.
The video to show how to make the wreath is below!

Scallop Snowflake Ornament

This ornament was made with silver cardstock and the Serene Snowflakes big snowflake. I used the Scallop Circle #2 die cut for the scallop and cut a circle out of the center using my coluzzle. On white I embossed the snowflake in clear and then used brocade blue with a sponge to highlight it. I used the white gel pen to draw the dots and stitching. I popped up the front scallop to give it a little dimension and put another full scallop on the back so the ornament looks nice from both sides.
I thought this would be great with a Christmas picture inside too. These are my little kidlets!

Santa's Pants Wine Bottle Holder

This is my new Santa wine bottle holder! I thought this would be great to bring when you go to a Christmas party and bring a bottle of wine! The suspenders are the handles to the "bag". I knew I would find a use for those little clips eventually!
To get full step by step directions with photos and the template for the hat, CLICK HERE!

Stampin' Up Meeting Swaps!

I go to a meeting every month put on by my Stampin' Up upline, Jen Heffernan, from the Green Mountain Stampers. She is wonderful and so are the meetings. We hear all the latest stamping information that we should know and talk over all the specials and new ideas. Everyone brings their newest projects to show so we can all benefit from everyone's creativity. Usually two of the demonstrators demonstrate a new technique or project that they have come up with so we can all do it with our own customers.
We get to do three cards while we are there that Jen has come up with and provides all the materials for! This is great because we get samples we have done ourselves with stamp sets and accessories that we might not already have. There is no charge for this meeting as long as you are somewhere in Jen's downline. Did you get that, IT'S FREE to attend as long as you are in her downline! If anyone is looking to sign up, this is the group you want to be in! If you are interested contact me and I'll give you the details. If you do not live close by you can get the make and takes and do swaps by mail! Jen also sends out an email after each meeting summarizing what we did with all the directions from the demonstrations!
Jen has over 80 people in her downline but anywhere from 15-30 people come to each meeting. At each meeting we have the option to make swaps, Jen gives us the number of people and we make that many and in return get all the other swaps full of new ideas! I thought I would share a few of the swaps that I got that I thought were great from our last meeting. I asked the ladies and they said I could share them with you! Here they are!

This is by Shanti-McKenna


This is by Pam Tatko


This is one of the make-n-takes that I made at the meeting that Jen designed.


This is Jennifer Heffernans' swap (my upline)


This is Grace Burkins' swap. The center part slides out of the slit punch holder and it is an ornament!


This is with the middle out showing the back of it! I thought if you put your Christmas picture on this removable ornament piece what a great Christmas card for family and close friends! They would get the card and then have the ornament to put on their tree!

Kissing Cardinals

I got inspired after I did my little moose and wanted to see what else I could come up with using the leaves #2 die cut. I decided one of the leaves looks just like a birds body. Why not a cardinal? Why not a boy and a girl in love? Sounds good, here they are!

Here is how to make them.
You will need four of the roundish smooth leaves from the leaves #2 die cut. You cut the stems off of two for the main bodies.
For the wings you put the leaf in the scallop oval punch like below.


Once you punch the end you can cut it around to look like the wing. The head of the bird is the 1" circle punch.


This is what you have left of the leaves. I punched the eyelid for the girl with the 1/4" circle punch and then used the spiky end (on the left) with the rest of the scallops for the feathers on the top of their heads!


I used the heart to heart punch for the heart and the Lovely as a Tree set, the big tree, for the branches of the tree they are sitting on in Handsome Hunter ink. The beaks you can use either star punch.
My two year old said they are me and my husband! So cute!

Leaves #2 Wreath

This was the project that I was doing with the Leaves #2 die cut when I got distracted and made the moose! I love this wreath. There is one on page 92 of the 2009-2010 Idea Book and Catalog.
I used a variety of green scraps I had of regular cardstock and a bunch of patterned paper. All the ends of the leaves are bent slightly and attached with the green capped Tombow glue around a cardboard base I cut out. The bow is cut paper with the center made out of the wide oval punch. In person this wreath has so much dimension it's stunning!
Here are close-ups of the leaves and the bow.

Christmas Present Moose

I love this moose! This idea was my 4 year old daughters. I was making something with the Leaves #2 die cut and she held up two of these leaves and said, "Look, moose antlers!" Kids are so smart. I of course stopped what I was doing and had to make a moose!

Punches used:
leaves #2 die cut
wide oval - nose
round tap - head
crop-a-dile - nostrils, black eyes
word window - arms
5 petal flower - ears and hooves
old three flower punch - hair
1/4" circle- white part of eyes

Penguin Card with Top Note die

This card is using the top Note die to make the penguin body. Such a good idea! I saw this card on Lisa Takeuchi's blog. If you want to see her version CLICK HERE. I just had to do one myself!